Designed and engineered for heavy-duty use on any material: dry, wet or sticky. From 1/2" to 2 1/2". Equipped with the powerful K Vibrator, the Rod Grizzly can handle the largest tonnages even under the most severe operating conditions. The screening surface is made up of rugged, easy to replace, low-cost rods, so that binding is impossible.
 
Effective vigorous vibration handles large tonnages under severe operating conditions. Vibration is easily changed to meet varying conditions.		   Dry
Wet
Sticky
Gummy Ores
Rock

Functions primarily as a single cut scalping unit, but a limited number of separations can be made. With a large feed intake opening and ample clearance between the power unit and the screen deck, a bed of material up to 12" size feed can flow unobstructed across the deck surface. For operations in which feed of larger than 12" is needed, the Symons Bar Grizzly is recommended.

Economy

Capacity

Long Life

Drive

Housing

Abrasion resistant screening surface is made up of long lasting, low cost easily replaced rods.

This durable unit can scalp up to 550 tons per hour. With its large intake opening and tall clearance, a feed 12" in height can flow across the screening surface.

The use of smooth, strong, parallel spring steel rods held in molded rubber spacers provides the ultimate in a long life, abrasion resistant screening surface.

Motor and drive are placed outside the housing, away from dust.

A 10 H.P. electric motor required is not included.

This unit can be furnished completely enclosed with removable end plates and top covers.
A B C D E F G H I J K L M N
Screen Size No. Decks Weight lbs. Feed in T.P.H. Cloth Width H.P. Deck Length Overall Height Discharge Width Base Length Base Width Opening Rod# Rod Sz
50 x 8 1 7500 200 50 10 96 62 24 144 68.5 3/8 1/2
265 1/2 1/2
330 5/8 1/2
430 3/4 1/2
550 1 1/2
600 1 3/8 3/4
650 2 3/4
700 2 1/2 3/4
© 2004 Symons Screens. All rights reserved.